|
LBD14 Controller Product Specification |
TNC Scooters Sales - Service - Parts |
LBD14 - Technical Parameters
|
Rated Voltage
|
24 Volts
|
|---|---|
|
Rated Current
|
30 Amps
|
|
Rated Motor
|
250 - 500 Watts
|
|
Rated Charger
|
≤ 3.0 Amps
|
|
Conversion Efficiency
|
95%
|
|
Under Voltage Protection
|
20.5 Volts
|
|
Brake Indicator
|
Available
|
|
Power Indicator
|
Available
|
|
Dimensions
|
8.5 cm x 6.9 cm x 3.8 cm
|
LBD14 - Protection Circuits
|
Under Voltage Protection
|
When battery voltage falls to a specified
value, the controller cuts off battery output preventing over discharge and extending battery life. (The cutoff value is approximately 20.5 volts, but varies from controller to controller.) |
|---|---|
|
Power Cut Off During Braking
|
When underway the brake switch signals the
controller to cut the battery output. |
LBD14 - Installation & Wiring
|
Power Connector
Connector Plug: DJ7022-6.3-11 See NOTES: |
|
|---|---|
|
Motor Connector
The motor
connector's white wire is yellow on the new
version of the LBD14 controller.
Connector Plug: DJ7022-6.3-21
|
|
|
Lock Connector
Connector Plug: DJ7021A-2.8-11 |
|
|
Derailleur Connector
Connector Plug: |
|
|
Charger Connector
Connector Plug: DJ7031A-2.8-21 |
|
|
Brake Signal Connector
Connector Plug: DJ7021A-2.8-11 |
|
|
Pilot Light Connector
Connector Plug: DJ7021A-28.11 |
|
|
Brake Connector
Connector Plug: DJ7021A-2.8-11 |
|
NOTES
|
|